I don't have anything in my control panel that says Programs and Features...I only have these:
Appearance and Themes
Network and Internet Connections
Add or Remove Programs
Sounds, Speech and Audio Devices
Performance and Matinence
Printers and Other Hardware
User Accounts
Accesibiltity Options
Security Center
Date, Time, Language and Regional Options
I attempted to look in the Add and Remove Programs area, but the ATI thing you mentioned isn't there. What should I do?
I do not know.. If I should make a new post about this or I should just use this for a reply. But to say for instance what happens if you have a game Graphic card that does support your computer/laptop anymore? Like for instance.. My laptop is a Windows XP Home edtion # 3 and the game card graphic is an "Intel" Intel does not support my system anymore and when I went to update the graphics for it.. Intel only had 2 updates for me to use and it was an 2007 and a 2005 update. So would it be ok, if I just unistall Intel (R) Graphics and install the ones that you had posted up on the link? Or should I just forget the whole Ideal, because the computer has a diffrent operating system.. and installing something like that can mess up my whole laptop? Undecided I am kind of new at laptops and so far I have bad luck with them >_< so I thought asking you would be a better Ideal before I "kill or destroy" the laptop.I'm not completely sure how you meant this. But I think I'd stay away from trying installing if I were you. You need the right drivers for the right graphics card you are using. Installing something else would not help. Not even sure if it would install at all. I suggest the same as shell did.
I am sorry for the bad grammer I am still learning Tongue
I have the same problem as Jela above with nothing in the control panel that leads to what your talking about. Your a genius already Red, thank you so much for this help already. Now if you can help us out with this last challenge you will my absolute hero. CheesyMy bad if it doesn't. Sometimes It can get abit off if there's another OS or as in my case, trying to translate some stuff over to english. Try looking for eet wiff the stuff I wrote on her post. Maibe that helps
When you say, "Run on low settings," what do you mean by that?'
Edit:
When I click on ATI Display Driver it won't let me uninstall it.
I've also got:
ATI Softwar Uninstall Utility
ATI Control Pannel
ATI (R) Radeon IGP 345M Graphics Control Driver for Microsoft(C) Windows(R) XP
would uninstalling either of those help?
Well, I can't find ATI Catalyst install manager in Programs and Features. I've checked and double checked, but it isn't there.It can wary from computer to computer. look on what I replied to rose. But if you don't see anything ATI related at all. You might not have Any drivers on your system for it right now. Hard to tell for me.
I had this problem, so I even went through and searched my folder for anything ATI. It was a no go, so I just installed the appropriate download anyways, and it turns out that it contains all the files Red it talking about. I guess some computers dont even come with it? I haven't had a single error from it and when I reinstalled FH it ran without the errors it had before. My water is still white till I take off the reflection and my characters are still white, but it did take care of several other exceptions and errors I was experiencing. So if its not there the computer might just not have it and its safe to download.
As I said though, things are still white so this fix didn't cure it. :/ Thanks for the updates though Red! Cheesy
i am learning that FH's survers are down but when will they come back up? i really need help because i just got FH but when i logged in it said "failed to connect to front survers" what do i do? please could anyone reply.....Josefine, this is the 2nd topic that I see you post in regarding the server in wrong thread. That problem you have is normal since the servers aren't up. You have to wait.. And please read the other threads about the server status and I'd be glad. Thanks
help red please >.< I've been having some white character glitch that I can't seem to fix. my driver is updated and everything. I have Vista and everything else works perfectly fine D: no matter what i try i can't change fur color or anything. I see other characters in the game white as well.
Edit: Actually anybody help plz XD
Well... I'm doing this thing but this really got on my nerves. :D English is not my mother tongue and reading this topic is like hell. But well...You gotta know for certain what card you have. Installing different ones can give you problems.
I check the name of my card and it was... Radeon Xpress 1300. ffffft? But there was also something like... eh matching device? :D And there was something like ATI blabla.
So, if I now think that ok, my card is that ATI or something. I klicked the link and now I don't know what to do. :(
klick
well?
I went to FH's settings and changed the display from "OpejGL" to "Direct3D9", restarted the game, and everything suddenly works. I've no idea why, but for future reference if anyone is experiencing similar problems this is all I did to fix it. It was a bit of a pain in the butt because I can't see my cursor, but after some mad clicking I was able to get it.I'd like to test this first. But... well, how? :D Where I find FH's settings?
You can find them in computer>harddrive>FeralHeart If u look around depends on setting u want. There is emotes one there, game settings and if ur looking for the one use to solve a problem by switching "OpejGL" to "Direct3D9" go into ogre.cfg open it with notepad if it asks for program and there u can switch the settings :)
Render System=OpenGL Rendering Subsystem
[Direct3D9 Rendering Subsystem]
Allow NVPerfHUD=No
Anti aliasing=None
Floating-point mode=Fastest
Full Screen=No
VSync=No
Video Mode=800 x 600 @ 32-bit colour
sRGB Gamma Conversion=No
[OpenGL Rendering Subsystem]
Colour Depth=32
Display Frequency=N/A
FSAA=0
Full Screen=No
RTT Preferred Mode=FBO
VSync=No
Video Mode=800 x 600
sRGB Gamma Conversion=No
I did as you said and found this:
http://img.photobucket.com/albums/v329/fiery_maze/MLS.png (http://img.photobucket.com/albums/v329/fiery_maze/MLS.png)
I'm not sure what to do now to be perfectly honest. xD
This page has a little more info. Does it help some?
http://img.photobucket.com/albums/v329/fiery_maze/Bios.png (http://img.photobucket.com/albums/v329/fiery_maze/Bios.png)
Sorry to bother you but...I'm having the same problem that Kirara had (with the characters turning black and whatnot), though no matter what I've done, nothing seems to work.
I've updated my graphics card, and have checked in three different ways that it was updated and that I didn't do anything screwy. I've also messed with the Direct3D9 and the OpenGL or whatever they're called. I've read through this thread, and a few others that have to deal with the visuals.
I don't think it's the computer, since it's run MMORPG's before, but I guess I won't rule it out.
Is there anything I haven't tried doing?
EDIT: I tried again with the Direct3D9 and it works a lot better now. The thing is, when I'm making characters when using that the pelts don't change color. I can sometimes get the graphics to work long enough with OpenGL but it's a pain.
I guess my question still is is there something else I can try, or else I can just keep switching back and forth XD
Red: It worked! lol I downloaded the drivers and its working beautifully. Thank you for all your help.
Which card do you use?
This is actually an issue that should be fixed by new drivers instead of causing them.
Press the link that's under BEFORE YOU TRY THIS.
And read that thread.
I did this exactly as it said to do. But when I open Feralheart, the water still doesn't show up and my colors are not right. Any help, please?
Means it's time to buy a new graphics card ^^I did this exactly as it said to do. But when I open Feralheart, the water still doesn't show up and my colors are not right. Any help, please?
I doubt it's the patch in this case.
It's most likely your hardware or drivers for them that are missing.
Could you get the full name of your computer, for example "toshiba m105-s3041" but also the bit version of your xp, if it's 32 bit or 64.
So, apparently my computer can download driver updates on its own... But it only downloads the important ones. I am watching a YouTube video where a guy just went to Windows Updates and just installed the new drivers from there. (not sure if they are the ones I need, though) However, I don't know if I need to remove the old ones first before downloading those or not.
I'm really sorry if no one knows what I'm talking about on this. I don't either, honestly. But the thing is, is my computer won't let me download the drivers from the link. An error message saying 'Failed- Download Error' So I don't really know what to do. If it helps, I can tell you that my computer is a 64-bit and uses NVidia and its a Windows 7. so, I hope someone can help. It seems to actually work before the update (which the screen used to spazz out with that too) Then suddenly I opened it one day and it was fine to my surprise. Then I downloaded the update and had the same problem. Hope someone can help, sorry for making this confusing if I did. XD