Your preset problem.
First of all download the preset file (E.g. Preset_5) Then from there all you need to do is place it in:
Local Disk (C:) >> Feral Heart >> My_Presets.
If it asks you to replace the preset file, do it.
If you already have a used preset file follow this!!
If you already have a used preset file that is the same number as the downloaded one, change the number of the downloaded file to a different number that matches a preset file that has not been used. Then replace it.
Next steps:
- Open up the preset file that you're using.
- Open up the .CFG file in note pad or any other word type documents.
- Change all the .JPG you can see into .PNG
- Where it says 'Material preset_#_bodyMatL/R' (e.g. # = Number) change the number to the same number it says on the preset file.
- Do the same to where it says 'Texture preset_#body.PNG'
- Save and try looking at the preset again.
There also might be the problem that the .PNG images might not be 512x512. Check by selecting the image in the folder and you should see this in the bottom left:
(http://i37BannedImageSite/2igmwsg.png)
To fix this problem open up GIMP or PhotoShop and make a new canvas with the Height and width of 512x512 and make sure it is opened up with RGB color. Then open up on another layer the PNG files in your preset folder and size them to 512x512
Mass markings.
Once you have downloaded your chosen mass markings, make sure you look inside the downloaded folder for a 'README' (.CFG) file inside. They are your instructions. Read them and you should be ok. If not, there should be a markings.CFG inside. Place that in:
Local Disk (C:) >> Feral Heart.
Then replace the file if it asks you to.
Once you have done that, go back to the mass marking pack file you downloaded and there should be another folder inside with PNG images inside. Place them in:
Local Disk (C:) >> Feral Heart >> Media >> Textures.
Again, replace if asked.
Items.
This is pretty much the same as mass markings. There should be an items.CFG file. Place that into:
Local Disk (C:) >> Feral Heart.
Then replace it
Go back to the downloaded folder and place the rest of the PNG/MESH/JPG files into:
Local Disk (C:) >> Feral Heart >> Media >> Items.
Then replace if asked.
Hope this helped. If you need more help just ask. c:
No problem!! ;3 Glad I could help.