You will need this to unzip the files:
http://www.7-zip.org/
Please note they arent animated, so you cant push them inside your Paw and flipp t hem out again. They will be out everytime.Ok.. so i made those Claws. And guess what? I made all the work to assign them to the Feline Tufts and some of the Manes. For YOU! Please dont ask about the Tufts and Manes without the Claws. I simply couldnt add them because i dont have those Files.
Anyways. Here you go. Download them at the Forum. How to thank you me? Just make an Post and say thank you at the Thread :3
To install ALL of them:
http://www.mediafire.com/?cn8n6k7o9j43ksw (German Installer <3 from Slycan)
http://www.mediafire.com/?ulnm87vfqc1rcyt (English Installer from Slycan)
Downloadlink to Install them
MANUALLY, like just single ones, List of the Meshes to replace is at the end of the Thread:
http://www.mediafire.com/?ch0c4kwalq1aw9wYou might take in just a single mane to test which one it is you want to use. Make sure to save your old files first so you can replace them when you dont want Claws anymore.Instructions:
To insert the Meshes into your Game:
Open FeralHeart Folder.
Open Media.
Open Models
Put everything inside. (
Well sure UNPACK / UNZIP them first!)
Done.
Your Claws will have the same color as your Mane/Tuft. Wasnt possible to make it another way, sorry ):
![](http://fc02.deviantart.net/fs70/f/2011/125/c/d/claws_now_available_for_you_by_tigerpython-d3fns3z.png)
To Show you where the Color of the Claws are:![](http://img840.imageshack.us/img840/775/clawplaceonthemanemask.png)
Uploaded with
ImageShack.usI choosed this ASrea cause its not used for Tufts or Manes.
Information about Replacing.
Manes you can Replace
fmane2 - Spiky
fmane3 - Forward
fmane4 - Side
fmane6 - Center Half
fmane7 - Forward Half
fmane8 - Side Half
fmane11 - Semi Full
fmane10 - Side Full
Tufts you can replace
ftuft4 - Cheek
ftuft5 - Elbow Rump
ftuft7 - Full Arm
ftuft11 - Full Tuft
ftuft12 - Back Mane
ftuft13 - Back, Cheek Mane
ftuft14 - Back, Full Mane
ftuft9 - Full Tuft
Canine Claws![](http://imageshack.us/m/717/5030/canineclaws.png)
Assigned to the Tails.
ctail1 - Wolftail
ctail2 - Thin Tail
ctail3 - Cat tail
ctail4 - Sickle Tail
Where do i have to put the Files?
Instructions:
Download the File. UNZIP / UNPACK the .zip-File (You might need 7zip <- free)
Open the Unzipped Folder.
Take out the Tail you want to use with Claws.
Replace the Mesh in the Models Folder of FH: FeralHeart -> Media -> Models
(If you want to use normal Mesh without Claws again, make a backup/Safety File of the original FH-File you want to replace!)
Here is the Download:
http://www.mediafire.com/?i1gvawaxpfgzxqdThats the Place on the Tail-UV where your Claws are:
![](http://img42.imageshack.us/img42/3144/wolftailwithclaws.png)