Map Maker Troubles?

[Reidiculous.]

I believe I sent you a message, hopefully it's what you needed.

And umm. I think it's Windows 7 or something like that.

Graphic Card Drive? Ummm. Lol, I have no idea what that is. x'D

[Ingredient]

Here's what the map maper looks like ;


I'll try switching Rendering systems, but that normally doesn't work for me, my FH just switches it back.

I just realised something about the image. You're not actually in the map, click the middle of that heightmap image in the the top left corner and see if that moves you somewhere

Graphic Card Drive? Ummm. Lol, I have no idea what that is. x'D

A graphics card driver is a type of device driver that is used in a computer system to control the installed graphics card. A graphics card can be added to the system, or a controller can be included with the motherboard for a computer system. For a graphics card to be fully functional, the graphics card driver software must be installed on the computer.

Hope you find this information helpful

[Thierry]

FH works fine on Windows 7, but try to check if your windows 7 is the starter/basic/home/profesional edition.

It is most likely the drivers are not updated and could be the reason since it happens when you get your FH out and in of focus.

Take a look to this:
http://www.feral-heart.com/index.php?option=com_jfusion&Itemid=2&jfile=index.php&topic=514.0

Basically you need to know your graphics card model, and the to search updated drivers for it from his official web page.

Take a look to this article to know your graphics card model:
http://windows.microsoft.com/en-US/windows-vista/Video-cards-frequently-asked-questions

once you know the model you can search the drivers yourself or askme to search it.

I checked your map in the map maker, Ingredient have reason, and you dont need to do all of this, just click on the mini map

[Reidiculous.]

It didn't help. xD I had already tried doing that and I just re-tried, but it still isn't showing up. And thanks for the definition Ingredient!

[Thierry]

what happening is that you are very high (up to the moon XD)

Ok, try this:

close FH

go to Media\terrains\ and open with notepad the file Seraphium.map

find this line:
[MapMaker]
StartPos=-160880 138314 -119724

and write instead:
[MapMaker]
StartPos=2500 200 2500

save and try again

[Ingredient]

It didn't help. xD I had already tried doing that and I just re-tried, but it still isn't showing up. And thanks for the definition Ingredient!

If you're actually inside the map image (that lil cursor will appear on the heightmap image), then maybe you're too high off the ground? Somehow...

[Reidiculous.]

Lol okay, I'll try that. But I let my character continue falling down for like 10 minutes straight soo.

[Ingredient]

Go to F3 mode and start flying towards the ground, press the "=" button on your keyboard to increase the camera speed.

[Reidiculous.]

It worked! :3 <3 Thank you both so much!

[Ingredient]

You're welcome