FeralHeart keeps on crashing after EXPORTING MAP

[Shawsky]

Well I just exported a new map that I made and so I turned off Feral Heart and went back on straight away but the problem was. When I did that, it was just a white screen than it shut down instantly. I thought it was just a little error, it came up with the small box after you crash. So I pressed enter and that didn't work so I thought i'll try pressing the 'ok' button instead, same result. So I re-downloaded Feral Heart and copied my files into that, it worked last time when I did that and I thought I could do it again but it didn't work. Guys, please help me on this, i've worked for so long on this map and I don't and I can't just let it go like that.

[Tatsuhiro]

Try going through and making sure you don't have any unwanted or unneeded particle files. When this problem came up for me, all I did was move the file from the 'Exports' folder and put in in a folder on my desktop. Then I went back into Feral-Heart and it was fine. Hope this helps...

[PrettyReckless]

In this case, there's usually an issue with particles (as mentioned above).
This being when the particles have somehow made copies out of themselves,
causing them to have _0 and/or _1 behind the actual particle name.
If you go into the folders and search for these, you might find one or two which should be deleted.
If you don't have this issue, but it continues to crash, let us know.

Goodluck.~