Feralheart crashes :/

[Croft]

Hello guyse.I have a problem now with the game FH.It keeps crashing when I open it.
It's something like this:



And it is annoying because I also changed ogre.cfg in this

Code: [Select]

Render System=OpenGL Rendering Subsystem
[OpenGL Rendering Subsystem]
Colour Depth=32
Display Frequency=N/A
FSAA=0
Full Screen=No
RTT Preferred Mode=FBO
VSync=No
VSync Interval=1
Video Mode=1280 x 800
sRGB Gamma Conversion=No
[Direct3D9 Rendering Subsystem]
Allow NVPerfHUD=No
FSAA=None
Floating-point mode=Fastest
Full Screen=No
VSync=No
Video Mode=800 x 600 @ 32-bit colour
sRGB Gamma Conversion=No


Do you guys have any ideas/suggestions?It pisses me off and I really want to play it.

Thanks for your attention.
Have a nice day!

[Kerriki]

Have you downloaded anything recently? If so, that could be what's causing the problem. Go into your particles folder and delete any files ending in _0, _1, etc. Also, where exactly does the game crash? When the game's starting up? At the title screen? When you're trying to connect to a map? It would be helpful if you gave me a little more details.

[OreoHeroz]

Look at this, perhaps.

Solution 1.
Try opening the game up as an administrator by right clicking the FH icon and selecting 'Run as Administrator'.

Solution 2.
If you can get to the home screen then select 'Options' >> Video >> Rendering subsystem >> Direct3G9. Once you have done that, restart your game and if it hasn't taken effect - then restart your pc as well.

Solution 3.
If you can't get get to your mane screen when you load the game up, follow this:

Open up your FH folder found in Local Disk (C:). Once you have opened up your Feral Heart folder look for a .CFG file that says 'ogre'. Open that up in note pad or any other word document.

Delete everything that is in there and replace it with this.

Render System=Direct3D9 Rendering Subsystem
[Direct3D9 Rendering Subsystem]
Allow NVPerfHUD=No
FSAA=0
Floating-point mode=Fastest
Full Screen=No
Rendering Device=Monitor-1-Intel(R) HD Graphics
Resource Creation Policy=Create on all devices
VSync=No
VSync Interval=1
Video Mode=800 x 600 @ 32-bit colour
sRGB Gamma Conversion=No
[OpenGL Rendering Subsystem]
Colour Depth=32
Display Frequency=N/A
FSAA=0
Full Screen=No
RTT Preferred Mode=FBO
VSync=No
VSync Interval=1
Video Mode=800 x 600
sRGB Gamma Conversion=No

Press save and try playing FH.

Solution 4.
Make sure you have no double particles. Check this by going to Local Disk (C:) >> Feral Heart >> Media >> Particles and check if there are two the EXACT same. If there is, delete one of them.

[Croft]

It still crashes guys

[AlphaEclipse]

Hmm, it is know for particles to sometimes show up in other FH folders. ^^ I'd try searching in there.

Also, if it still crashes, try reinstalling FH. (SAVE all your presets and maps!)

[Kerriki]

It still crashes guys

If you could give us some more details about the crashing that would be nice, and it will help us help you.

[Croft]

Ok well this was on Thursday.I joined on FH but it directly crashed.Also,i checked out for the problem because it was kinda annoying ya kno'. So what I found is that,feralheart is not compatible.Um what?It worked before,and I have window vista Service Pack 1...I don't know what's happening,I'm thinking about leaving FH forever,but I still wanna play it for my friends and stuff....

Here's a proof :



What happened It WORKED BEFORE. And now,my friends are saying it's a virus or I should repair my pc.I can't really do this right now

[AlphaEclipse]

Hmm, I found this and it may help.

Follow these simple instructions, and you'll be able to remember them every time you want to start up an incompatible application.

> Firstly, right-click on the incompatible application and move your cursor down to Properties
> After clicking Properties, click on the tab marked Compatibility
> On the Compatibility tab, tick the box marked "Run in compatibility mode for:", and select Windows XP Service Pack 3, or earlier if this also refuses to work.

I'm not to familiar with this problem, but FH may have just installed wrong, or something triggered it to give you that problem. Really, if what I quoted above doesn't work, the best you could do is reinstall FH.  

[Croft]

I also tried that but still won't work.
I reinstalled + I installed the FH patch...but it won't work. Is it good what appears in my ogre.cfg?

Render System=Direct3D9 Rendering Subsystem
[Direct3D9 Rendering Subsystem]
Allow NVPerfHUD=No
FSAA=0
Floating-point mode=Fastest
Full Screen=No
Rendering Device=Monitor-1-
Resource Creation Policy=Create on all devices
VSync=No
VSync Interval=1
Video Mode=800 x 600 @ 32-bit colour
sRGB Gamma Conversion=No
[OpenGL Rendering Subsystem]
Colour Depth=32
Display Frequency=N/A
FSAA=0
Full Screen=No
RTT Preferred Mode=FBO
VSync=No
VSync Interval=1
Video Mode=800 x 600
sRGB Gamma Conversion=No

[AlphaEclipse]

Ah, I think I see why it's not working. Don't install the patch! Uninstall again and reinstall with ONLY the ORIGINAL FH. :3 Also, your Orge is perfectly fine. I'll edit this when I think of another possible solution to your problem.