Author Topic: preset help  (Read 1736 times)

Offline Dentrimental

  • Finest Floof
  • ***
  • Posts: 549
  • Country: pl
  • Floof-O-Meter: 21
  • "Promise me we'll always be there for eachother."
    • View Profile
preset help
« on: June 15, 2020, 04:24:21 pm »
hello! so i have this problem where parts of the preset wont show up but they are litteraly IN. THE. FOLDER.
u can only see the tail. but,
all the files are there. why wont it show up and what can i do to make it show up?
Thank you, thank you, thank you!
Thank you for gracing me with your presence!

Offline Garfield.

  • ✨Magical chihuahua✨
  • Finest Floof
  • ***
  • Posts: 901
  • Country: co
  • Floof-O-Meter: 80
  • hello, it's mac
    • channel/UClsDv82N2aher_4BWUy8KPQ
    • View Profile
Re: preset help
« Reply #1 on: June 15, 2020, 04:28:33 pm »
You probably have the coding missing or material file.
-You could aso have put something wrong in the material file such as the property of the file.

Offline Dentrimental

  • Finest Floof
  • ***
  • Posts: 549
  • Country: pl
  • Floof-O-Meter: 21
  • "Promise me we'll always be there for eachother."
    • View Profile
Re: preset help
« Reply #2 on: June 15, 2020, 04:33:07 pm »
material file..? but i have the preset_7 material
Thank you, thank you, thank you!
Thank you for gracing me with your presence!

Offline G4RG0YLE

  • Elder Grey Pelt
  • ****
  • Posts: 3,431
  • Country: gb
  • Floof-O-Meter: 170
  • Avatar © Felicia on Discord ♡
    • View Profile
Re: preset help
« Reply #3 on: June 15, 2020, 04:33:35 pm »
Try making sure that the image files match the .mat file names.
For example, if they are .png image files,
go into your .mat folder and make sure the body section is showing .png as well.

© short ' cakes on Discord ♡

Offline DylanCheetah

  • The Ice Prince
  • Dedicated Supporter
  • ***
  • Posts: 466
  • Country: us
  • Floof-O-Meter: 73
  • Stand up for what is right!
    • DylanCheetah
    • channel/UCqd67NThdXJwpXimwYb3kaQ
    • View Profile
Re: preset help
« Reply #4 on: June 15, 2020, 04:35:33 pm »
Check the texture lines in your material file. Caution stripes indicate that a texture failed to load. In this case, it appears to be the body and head textures. Also, make sure that the file extensions match. If your texture is in PNG format, the extension should be ".png". If it is JPEG, it should be either ".jpg" or ".jpeg" depending on the image editing software you used.

Offline faewyn

  • Lady of the Forest
  • Experienced Traveler
  • **
  • Posts: 229
  • Country: us
  • Floof-O-Meter: 28
  • ᓚᘏᗢ embean
    • f-a-e-w-y-n
    • emxlybeth
    • View Profile
Re: preset help
« Reply #5 on: June 15, 2020, 04:38:31 pm »
What Scally said. The tail is probably seen because it was automatically set to png. Your images have to also match what you have in the material file as well. For example, if you had two sides of the body, a bodyL and bodyR, in the material file, you would have to add an L in one for the body and R in the other. If your images were ever jpg(which i'm not sure if jpg even works), they would have to say jpg in the MAT file. I hope your problem is fixed :)

Siggy by danysaurus

Offline DylanCheetah

  • The Ice Prince
  • Dedicated Supporter
  • ***
  • Posts: 466
  • Country: us
  • Floof-O-Meter: 73
  • Stand up for what is right!
    • DylanCheetah
    • channel/UCqd67NThdXJwpXimwYb3kaQ
    • View Profile
Re: preset help
« Reply #6 on: June 15, 2020, 05:29:19 pm »
One time I did have a JPEG file that somehow had a ".jpeg" extension instead of the normal ".jpg" extension. So if you're using JPEG, you may need to try both to figure out which one works.

Offline Dark_heart

  • Professional Razmirz's Cheese Stealer
  • Pack & Pride Representative
  • ****
  • Posts: 1,363
  • Country: 00
  • Floof-O-Meter: 83
  • -- Moving account --
    • View Profile
Re: preset help
« Reply #7 on: June 15, 2020, 06:43:27 pm »
Material files are these pictures what you draw. preset_7.material is just a code.
Tell me:
• what format (jpg, png, etc.) are you using?
• what program to drawing you're using?
On new account Aiiokia